EMAX ECOII 3210 800KV 900KV 1050KV 1200KV Brushless Drone Motor for 8-10inch FPV RC Drone

Product Code: 0101096182

Availability:Out of stock

EMAX / ECO II series

ECO II 3210

The EMAX ECO II 3210 brushless motor brings four KV options to 8–10-inch multirotor builds. The 800KV and 900KV versions support 6–8S; the 1050KV and 1200KV versions are specified for 6S. Each shares a 99g-with-wire platform, 12N14P architecture, M5 propeller shaft and 19 × 19mm four-hole mount.

EMAX ECO II 3210 motor: four KV options, tested output up to 4.38kg with 900KV at 31.3V, 12N14P and 39.1mm diameter
Weight99gWith 270mm wires
Power system6S–8SKV-dependent support
Propeller range8–10″KV-dependent recommendation
KV options4800 / 900 / 1050 / 1200KV
Designed for the build

The ECO II step into larger props.

A common 39.1mm-diameter platform lets you choose the winding for the power system rather than changing your mechanical footprint. Match the propeller, ESC and battery to the specific KV/voltage combination; the published 8–10-inch range applies to the motor family, not every variant.

ECO II 3210 KV guide: 800KV 6–8S, 900KV 6–8S, 1050KV 6S and 1200KV 6S with propeller ranges and individually labeled bench thrust
Swipe to explore all four KV options →
Find your winding

Four KV options. One mounting footprint.

Voltage, propeller range and winding resistance vary by KV. Choose the option that matches your battery, propeller and ESC setup.

800KV

Lower-KV choice with the broadest published propeller range.

Cells6–8S
Propeller8–10″
Resistance58mΩ
900KV

6–8S option for 8–9-inch multirotor configurations.

Cells6–8S
Propeller8–9″
Resistance52mΩ
1050KV

6S choice with an 8–9-inch published propeller range.

Cells6S
Propeller8–9″
Resistance41mΩ
1200KV

Highest-KV option, specified for 6S and 8-inch props.

Cells6S
Propeller8″
Resistance35mΩ
ECO II 3210 shared 99g motor platform with 19 by 19mm mount, 270mm leads, 39.1mm diameter and four voltage-specific KV options
Swipe to read the platform details →

Weight is 99g with wire. The shared mechanical platform is specified across 800KV, 900KV, 1050KV and 1200KV.

Motor anatomy

Fitment and construction, clearly marked.

The 3210 uses a steel M5 propeller shaft, ventilated anodized bell, multi-strand winding, precision bearing and a 19 × 19mm four-hole M3 mount. Its 270mm 18 AWG silicone leads leave room to route to the ESC.

12N14PMotor architecture
6mmBearing shaft
19 × 19mm4 × M3 mounting pattern
270mm18 AWG silicone leads
Annotated ECO II 3210 hardware: steel M5 shaft, ventilated rotor bell, multi-strand windings, precision bearing, 19 by 19mm four-hole mount and 270mm leads
Swipe to inspect the hardware callouts →
Specifications

Mechanical and electrical details.

Shared hardware specifications apply across all four KV choices. Electrical resistance and idle current change with the winding.

Shared mechanical specification

Motor dimensions Ø39.1 × 45.8mm
Weight 99g, with wire
Framework 12N14P
Bearing shaft 6mm
Prop shaft M5, clockwise thread
Mounting pattern 19 × 19mm, 4 × M3
Motor lead 270mm, 18 AWG silicone wire

By KV option

800KV 6–8S · 8–10″ prop · 58mΩ · 1.5A idle at 10V
900KV 6–8S · 8–9″ prop · 52mΩ · 1.6A idle at 10V
1050KV 6S · 8–9″ prop · 41mΩ · 1.9A idle at 10V
1200KV 6S · 8″ prop · 35mΩ · 2.4A idle at 10V
Measured performance

Full load-test data by KV and propeller.

The following measurements are from EMAX load-test records. Results may vary with battery, propeller, environment, and installation conditions.

800KV
Battery cells6-8S
Recommended prop8"-10"
Idle current1.5A @ 10V
Resistance58mΩ
Peak current (spec)59.4A
Max power (spec)1449W

HQ8045 3-blade propeller

ECO II 3210 Brushless Motor 800KV — HQ8045, 3-blade

Voltage V Current A Thrust g Power W Efficiency g/W Speed RPM Throttle %
32 2.56 445 81.9 5.43 6867 30
32 5.24 781 167.7 4.66 8890 40
31.9 9.47 1187 302.1 3.93 10851 50
31.9 15.18 1638 484.2 3.38 12605 60
31.8 22.31 2102 709.5 2.96 14242 70
31.7 31.53 2666 999.5 2.67 15773 80
31.6 42.17 3170 1332.6 2.38 17227 90
31.4 56.86 3864 1785.4 2.16 18452 100

GF8040 3-blade propeller

ECO II 3210 Brushless Motor 800KV — GF8040, 3-blade

Voltage V Current A Thrust g Power W Efficiency g/W Speed RPM Throttle %
32 2.26 402 72.3 5.56 7002 30
32 4.54 717 145.3 4.94 9087 40
31.9 7.89 1088 251.7 4.32 11115 50
31.9 12.6 1505 401.9 3.74 13029 60
31.8 18.58 1970 590.8 3.33 14862 70
31.7 26.55 2531 841.6 3.01 16717 80
31.7 35.56 3042 1127.3 2.70 18210 90
31.5 48.35 3813 1523.0 2.50 19755 100

GF8060 3-blade propeller

ECO II 3210 Brushless Motor 800KV — GF8060, 3-blade

Voltage V Current A Thrust g Power W Efficiency g/W Speed RPM Throttle %
32 2.68 455 85.8 5.31 6804 30
32 5.48 814 175.4 4.64 8842 40
31.9 9.61 1228 306.6 4.01 10827 50
31.9 15.13 1661 482.6 3.44 12639 60
31.8 22.09 2132 702.5 3.04 14303 70
31.7 30.73 2659 974.1 2.73 15920 80
31.6 41.6 3224 1314.6 2.45 17383 90
31.5 56.12 3962 1767.8 2.24 18737 100

GF1050 3-blade propeller

ECO II 3210 Brushless Motor 800KV — GF1050, 3-blade

Voltage V Current A Thrust g Power W Efficiency g/W Speed RPM Throttle %
25 2.78 477 69.5 6.86 5068 30
25 5.83 843 145.8 5.78 6596 40
24.9 10.24 1244 255.0 4.88 7987 50
24.9 16.02 1704 398.9 4.27 9308 60
24.8 23.56 2190 584.3 3.75 10514 70
24.7 32.55 2647 804.0 3.29 11577 80
24.6 42.62 3118 1048.5 2.97 12526 90
24.5 54.31 3559 1330.6 2.67 13386 100

HQ1050 3-blade propeller

ECO II 3210 Brushless Motor 800KV — HQ1050, 3-blade

Voltage V Current A Thrust g Power W Efficiency g/W Speed RPM Throttle %
25 2.85 492 71.2 6.91 5043 30
25 5.99 855 149.8 5.71 6546 40
24.9 10.67 1290 265.7 4.86 7901 50
24.9 16.62 1755 413.8 4.24 9169 60
24.8 24.56 2257 609.1 3.71 10340 70
24.7 34.21 2743 845.0 3.25 11333 80
24.6 45.3 3235 1114.4 2.90 12217 90
24.5 57.77 3679 1415.4 2.60 13055 100

HQ1055 3-blade propeller

ECO II 3210 Brushless Motor 800KV — HQ1055, 3-blade

Voltage V Current A Thrust g Power W Efficiency g/W Speed RPM Throttle %
25 2.99 478 74.8 6.39 5017 30
25 6.38 851 159.5 5.34 6473 40
24.9 11.18 1277 278.4 4.59 7816 50
24.9 17.46 1753 434.8 4.03 9047 60
24.8 25.61 2242 635.1 3.53 10172 70
24.7 35.6 2777 879.3 3.16 11143 80
24.6 46.57 3237 1145.6 2.83 11978 90
24.4 59.39 3680 1449.1 2.54 12659 100
900KV
Battery cells6-8S
Recommended prop8"-9"
Idle current1.6A @ 10V
Resistance52mΩ
Peak current (spec)70.5A
Max power (spec)2208W

GF9045 3-blade propeller

ECO II 3210 Brushless Motor 900KV — GF9045, 3-blade

Voltage V Current A Thrust g Power W Efficiency g/W Speed RPM Throttle %
25 2.68 397 67.0 5.93 5856 30
25 5.54 750 138.5 5.42 7634 40
24.9 9.77 1138 243.3 4.68 9312 50
24.9 15.54 1561 386.9 4.03 10876 60
24.8 22.64 1992 561.5 3.55 12290 70
24.7 31.19 2454 770.4 3.19 13617 80
24.6 42.03 2945 1033.9 2.85 14840 90
24.5 54.9 3408 1345.0 2.53 15925 100

HQ9050 3-blade propeller

ECO II 3210 Brushless Motor 900KV — HQ9050, 3-blade

Voltage V Current A Thrust g Power W Efficiency g/W Speed RPM Throttle %
25 3.05 473 76.2 6.20 5711 30
25 6.47 844 161.8 5.22 7426 40
25 11.37 1268 284.2 4.46 8995 50
24.9 18.45 1734 459.4 3.77 10461 60
24.8 26.68 2219 661.7 3.35 11774 70
24.7 36.69 2710 906.2 2.99 12911 80
24.6 48.83 3195 1201.2 2.66 13925 90
24.5 62.96 3680 1542.5 2.39 14893 100

GF8040 3-blade propeller

ECO II 3210 Brushless Motor 900KV — GF8040, 3-blade

Voltage V Current A Thrust g Power W Efficiency g/W Speed RPM Throttle %
32 3.01 509 96.3 5.28 7704 30
32 6.07 886 194.2 4.56 9972 40
31.9 10.67 1312 340.4 3.85 12116 50
31.8 16.82 1793 534.9 3.35 14115 60
31.8 24.67 2349 784.5 2.99 16036 70
31.7 35.36 2985 1120.9 2.66 17833 80
31.5 47 3551 1480.5 2.40 19366 90
31.4 61.49 4318 1930.8 2.24 21104 100

HQ8045 3-blade propeller

ECO II 3210 Brushless Motor 900KV — HQ8045, 3-blade

Voltage V Current A Thrust g Power W Efficiency g/W Speed RPM Throttle %
32 3.37 527 107.8 4.89 7499 30
31.9 7 933 223.3 4.18 9746 40
31.9 12.42 1399 396.2 3.53 11786 50
31.8 19.86 1918 631.5 3.04 13594 60
31.7 29.2 2468 925.6 2.67 15271 70
31.6 40.49 3013 1279.5 2.35 16895 80
31.5 55.15 3558 1737.2 2.05 18009 90
31.3 70.55 4378 2208.2 1.98 19853 100

GF8046 3-blade propeller

ECO II 3210 Brushless Motor 900KV — GF8046, 3-blade

Voltage V Current A Thrust g Power W Efficiency g/W Speed RPM Throttle %
32 2.66 379 85.1 4.45 7842 30
32 5.27 731 168.6 4.33 10210 40
31.9 9.16 1112 292.2 3.81 12408 50
31.9 14.59 1548 465.4 3.33 14510 60
31.8 21.38 2052 679.9 3.02 16596 70
31.7 30.07 2640 953.2 2.77 18536 80
31.6 40.68 3066 1285.5 2.39 20212 90
31.5 53.92 3590 1698.5 2.11 22159 100
1050KV
Battery cells6S
Recommended prop8"-9"
Idle current1.9A @ 10V
Resistance41mΩ
Peak current (spec)77.9A
Max power (spec)1893W

GF8040 3-blade propeller

ECO II 3210 Brushless Motor 1050KV — GF8040, 3-blade

Voltage V Current A Thrust g Power W Efficiency g/W Speed RPM Throttle %
25 3.26 430 81.5 5.28 7195 30
25 6.29 742 157.2 4.72 9205 40
24.9 10.98 1133 273.4 4.14 11236 50
24.9 17.08 1532 425.3 3.60 13076 60
24.8 25 1990 620.0 3.21 14808 70
24.7 34.98 2503 864.0 2.90 16515 80
24.6 46.58 2996 1145.9 2.61 18025 90
24.5 60.92 3692 1492.5 2.47 19419 100

HQ8045 3-blade propeller

ECO II 3210 Brushless Motor 1050KV — HQ8045, 3-blade

Voltage V Current A Thrust g Power W Efficiency g/W Speed RPM Throttle %
25 3.61 453 90.2 5.02 7001 30
25 7.29 797 182.2 4.37 8979 40
24.9 12.79 1187 318.5 3.73 10931 50
24.9 20.22 1614 503.5 3.21 12639 60
24.8 29.49 2079 731.4 2.84 14145 70
24.7 40.58 2537 1002.3 2.53 15640 80
24.5 54 2996 1323.0 2.26 17013 90
24.4 70.84 3710 1728.5 2.15 18445 100

GF8060 3-blade propeller

ECO II 3210 Brushless Motor 1050KV — GF8060, 3-blade

Voltage V Current A Thrust g Power W Efficiency g/W Speed RPM Throttle %
25 3.75 476 93.8 5.08 6899 30
25 7.57 845 189.2 4.46 8915 40
24.9 13.16 1250 327.7 3.81 10862 50
24.9 20.47 1690 509.7 3.32 12626 60
24.8 29.31 2134 726.9 2.94 14169 70
24.7 40.37 2627 997.1 2.63 15702 80
24.5 54.28 3173 1329.9 2.39 17037 90
24.4 69.37 3784 1692.6 2.24 18581 100

GF9045 3-blade propeller

ECO II 3210 Brushless Motor 1050KV — GF9045, 3-blade

Voltage V Current A Thrust g Power W Efficiency g/W Speed RPM Throttle %
25 4.1 545 102.5 5.32 6758 30
25 8.44 965 211.0 4.57 8725 40
24.9 14.87 1459 370.3 3.94 10567 50
24.8 23.21 1970 575.6 3.42 12264 60
24.7 33.09 2445 817.3 2.99 13645 70
24.6 45.46 2972 1118.3 2.66 15016 80
24.5 60.28 3484 1476.9 2.36 16192 90
24.3 77.9 3920 1893.0 2.07 17180 100
1200KV
Battery cells6S
Recommended prop8"
Idle current2.4A @ 10V
Resistance35mΩ
Peak current (spec)88.6A
Max power (spec)2135W

GF8040 3-blade propeller

ECO II 3210 Brushless Motor 1200KV — GF8040, 3-blade

Voltage V Current A Thrust g Power W Efficiency g/W Speed RPM Throttle %
25 4.45 519 111.2 4.67 7821 30
24.9 7.81 831 194.5 4.27 9678 40
24.9 14.04 1284 349.6 3.67 12043 50
24.8 22.31 1784 553.3 3.22 14090 60
24.7 32.62 2303 805.7 2.86 15993 70
24.6 45.92 2906 1129.6 2.57 17655 80
24.4 61.28 3468 1495.2 2.32 19176 90
24.3 79.4 4181 1929.4 2.17 20753 100

HQ8045 3-blade propeller

ECO II 3210 Brushless Motor 1200KV — HQ8045, 3-blade

Voltage V Current A Thrust g Power W Efficiency g/W Speed RPM Throttle %
25 4.55 503 113.8 4.42 7401 30
24.9 8.5 861 211.7 4.07 9330 40
24.8 15.69 1310 389.1 3.37 11541 50
24.7 25.53 1862 630.6 2.95 13457 60
24.6 37.59 2400 924.7 2.60 15112 70
24.5 52 2903 1274.0 2.28 16543 80
24.3 68.86 3392 1673.3 2.03 17810 90
24.1 88.58 4079 2134.8 1.91 19312 100

GF8*6E 2-blade propeller

ECO II 3210 Brushless Motor 1200KV — GF8*6E, 2-blade

Voltage V Current A Thrust g Power W Efficiency g/W Speed RPM Throttle %
25 4.36 468 109.0 4.29 7850 30
24.9 7.61 743 189.5 3.92 9705 40
24.9 13.91 1180 346.4 3.41 11992 50
24.8 22.26 1643 552.0 2.98 13988 60
24.7 32.95 2116 813.9 2.60 15806 70
24.5 46.71 2589 1144.4 2.26 17371 80
24.4 63.49 2833 1549.2 1.83 18706 90
24.2 83.07 3285 2010.3 1.63 20170 100
ECO II 3210 package with one motor, four M3 by 10mm screws and one aluminum M5 nylock nut
Swipe to read the package contents →
In the box

Motor and mounting hardware.

Each package includes one ECO II 3210 motor in the selected KV, four M3 × 10mm mounting screws and one aluminum M5 nylock nut. A propeller, ESC and battery are not listed as included.

EMAX ECO II 3210 brushless multirotor motor. Specifications transcribed from the supplied ECOII-3210 V1.0 basic-information and specification workbooks. Confirm propeller clearance, ESC capacity and thermal behavior in the completed aircraft. Graphics are based on an 800KV sample; shared hardware appearance is representative of the motor family.